Invacare Traditional Three Position Geriatric Recliner

More Information

• Assembling the Recliner:
  1. Remove back frame with back cushion from its carton.
  2. Lock the rear casters. Work from the rear of the recliner base. Ensure that footrest is in closed position before installing the back frame with cushion.
  3. Lift the chair back in an upright position behind the rear seat cross brace.
  4. Slide the back tubes into the open tube ends of the rear seat cross brace.
  5. Lift the plastic skirt mounted on the bottom of the seat and align behind the rear seat frame cross brace.
  6. Align the holes in the skirt to the holes in the chair back by fastening the hardware.
  7. Securely tighten the two hex screws to secure the back cushion to the back frame.
• Reclining the Chair:
  1. The chair cannot recline if the recline lock bar is engaged. An assistant must first swing recline lock bar up to the chair back and lock into position.
  2. While seated in the recliner, grip the armrests and simultaneously lean body weight back and push forward with your arms until a recline position reached.
  3. The footrest will lift automatically when the chair back reclines.
  4. The occupant should not be required to exert excessive force to change recline positions. If the recliner exhibits difficulty in reclining, an attendant should be called for assistance.

Specification

Warranty

Limited Warranty: 3 Year on Chair, 1 Year on Upholstery

Customer Reviews