Rolyan Functional Position Splint With Slot and Loop Strapping

How to Use Rolyan Splint With Slot And Loop Strapping?

Fit:

• The splint can be modified for a better fit.
• The splint should cover two-thirds of the length of the forearm.
• The splint should clear bony prominences, and it should not impinge the thumb web space
• The proximal edge of the splint can be flared for increased comfort

Modification:

• To trim or modify these splints, which are made from 1/8" (3.2mm) Polyformsplinting material, spot-heat the splint with a heat gun or in a heat pan of water at a temperature of 150° to 160°F (65° to 70°C) for one minute or until pliable.
• Heating the entire splint may cause it to lose its preformed shape.
• Polyform has a high degree of drapefor better results when modifying the material, shape it with stroking movements.
• Note: Be careful not to heat the splint near the strapping or the plastic base for the slot-and-loop strapping.

Strapping

• Put the splint into position by sliding the fingers under the elastic strapping.
• If necessary, adjust the slot-and-loop strapping for proper fitfeed it through the slotted plastic base on the underside of the splint to increase or decrease the amount of strapping needed to secure each finger
• Attach the two hook tabs to the ulnar and radial borders of the hand portion of the splint.
• Attach the elastic strap to the hook tabs
• Attach forearm and thumb straps.
• If desired, trim strap length.
• An additional strap may be placed across the wrist for increased support.

Care And Cleaning:

• The splint will lose its shape in temperatures over 135°F (57°C) - It should be kept away from sources of heat such as ovens, hot water, open flames, and sunny car windows
• The splint may be cleaned with soap and lukewarm water.
• The straps may be washed with soap and water, but the adhesive portion should not be moistened.
• The splint and straps should be allowed to dry thoroughly before reapplication of the splint.

Contraindications:

• Not for the acute phase of most wrist or hand fractures.
• Not for use directly over open wounds and infected areas.

Precautions:

• These splints are to be fitted initially by a healthcare professional who is familiar with the purpose for which they are prescribed.
• The healthcare professional is responsible for providing wearing instructions and precautions to other healthcare practitioners, care providers involved in the patients care, and the patient.
• If unusual swelling, skin discoloration or discomfort occurs, use should be discontinued and a healthcare professional consulted.
• Be careful that the straps are not so tight that they interfere with circulation.
• After heating thesplinting material, always check its temperature before applying it to the patient.