Get 7% OFF* Over $50 - Use Code: RSAVE7

Hpfy rehabstore.com
Rehab-Store cart Cart
Loctite SuperGlue Bottle For Hard-To-Reach Places
Loctite SuperGlue Bottle For Hard-To-Reach Places

Loctite SuperGlue Bottle For Hard-To-Reach Places

Brand/Manufacturer: HENKEL CORP
Save

Loctite SuperGlue Bottle For Hard-To-Reach Places is a powerful adhesive which is superb for gluing finger hooks, neoprene, leather, rubber and most plastics. Longneck nozzle with precision tip is great for hard-to-reach places and won't drip during application. Loctite Super Glue cap features a metal pin that seals nozzle for clog-free performance.

Read More 
Item # Desc Pkg Price
230992 Tube, 18 oz. (5.0g) Each
$13.08
$9.72

Features

  • Loctite SuperGlue Longneck Bottle For Hard-To-Reach Places has an easy-open cap with a metal pin that cleans and seals the nozzle for a clog-free performance
  • Long nozzle is ideal for gluing hard to reach surfaces
  • Dries clear and sets without clamping
  • Dries transparent
  • Sets in seconds
  • Pin-point nozzle
  • Invisible repairs
  • No clamping required
  • Allows for precise application
  • Remove with nail polish remover
  • Fixture Time: 15-30 seconds
  • Full Bond Strength: 12 to 24 hours
  • Odor: Sharp, irritating (use in a well ventilated area)
  • Flashpoint: 1.05 176°F to 200°F (80°C to 93.4°C)
  • Color: Transparent colorless
  • Appearance: Liquid
  • Recommended For:
    - Bonding leather, cork, paper, cardboard, wood, chipboard, fabric, metal, ceramic, rubber and hard plastics such as Plexiglass, polycarbonate, polystyrene and PVC
    - Repairing figurines, costume jewelry, cameras, toys, metal car parts, wiper blades, rubber seals and O-rings
  • Not Recommended For:
    - Use in dishwasher, oven or microwave
    - Use on repairs needing high flexibility
    - Glazed surfaces
    - Exterior Applications
    - Styrofoam, foam rubber, pure bone china, glass, silicone rubber, PTFE, polyethylene and polypropylene
    Note: Cure time is dependent upon temperature, humidity, porosity of surfaces bonded and amount of adhesive used
    Click Here For Technical Data Sheet

More Information

  • Instructions For Use
    - Tools Typically Required: Tissue paper
    - Safety Precautions: Apply in a well-ventilated area. Wear gloves and wash hands after use
    - Preparation: Surfaces must be clean, dry and free from oil, wax, and paint. Protect work area. Lightly roughen smooth surfaces for better adhesion. Pre-fit parts to be joined.
    - Application:
    1. Twist off cap by turning counter-clockwise ¼ turn
    2. Apply sparingly to one surface only using approximately one drop per square inch of surface. Press surfaces together immediately
    3. Hold in place for 15 to 30 seconds until bond sets. Do not reposition parts.
    4. Clean excess adhesive with tissue paper and replace cap.
    5. Twist on the cap to close and seal.
    - Clean-up
    1. After cleaning, wet any tissue used for wiping off glue with water and dispose of
    2. When cleaning up larger quantities of uncured adhesive, apply water and allow to cure and then scrape up.
    Note: This may result in damage to the surfaces. Cured adhesive may be cut away with caution using a sharp blade, removed with acetone or with boiling water
    Note: Acetone is highly flammable and may not be suitable for use on all materials, test surface first. Follow manufacturer’s instructions
  • Handling Time:
    - Leave undisturbed for at least 10 minutes
    - For best results, allow full bond strength to develop overnight before handling
  • Shelf Life: From date of manufacture (unopened)
    - Stored at 2-8°C: 18 months
    - Stored at 20°C: 18 months
  • Warning:
    - Contains Cyanoacrylat
    - Can cause severe eye injury
    - Bonds skin instantly
    - May cause allergic skin reaction
    - Skin contact may cause burns.
  • Precautions
    -    Application Temperature: Do not apply below 50°F (10°C)
    - Use in a well-ventilated area
    - Avoid contact with skin and eyes.
    - In case of eye contact, flush with water for 15 minutes; call a physician
    - For skin contact, flush with water
    - For ingestion, do not induce vomiting; call a physician
    - If spilled on clothing, flush with large quantities of water
    - KEEP OUT OF THE REACH OF CHILDREN

Customer Reviews

Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*


Submit Cancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.rehab-store.com

Close