Chattanooga Hydrocollator M-4 Mobile Heating Unit

Chattanooga Hydrocollator M-4 Mobile Heating Unit

Brand/Manufacturer: CHATTANOOGA GROUP
Save
Authorized Retailer Badge

Chattanooga Hydrocollator M-4 Mobile Heating Unit is durable and easy to maintain, it is high-quality stainless steel unit which gives you a constant supply of temperature-consistent HotPacs. Full fiberglass insulation on mobile unit ensure minimum energy use and prevent heat loss. It is thermostatically controlled to keep steam packs at the ideal temperature for maximum therapeutic benefit.

Item# 2502

  • ORDERING DETAILS
  • Total: $3798.85
    Total: $2922.19
Total: $3798.85
Total: $2922.19

Chattanooga Hydrocollator M-4 Mobile Heating Unit Features

  • Chattanooga Hydrocollator M-4 Mobile Heating Unit is easy maintain and simple to fill and drain
  • Requires just 20" by 32" floor space
  • Extra large tank
  • Oversized drain
  • A second thermostat guards against low water level and overheating
  • No plumbing required
  • Uses 110 current, 12.5 amp
  • Product weight: 132lb
  • Product dimensions: 35"L x 20"W x 33"H (89cm x 51cm x 84cm)
  • Also available (separately):
    - Chattanooga Side Table Rack (code 4010)
    - Chattanooga TM-1 Electric Lotion Warmer (code 4012)
    - Chattanooga Dial Thermometer (code 4228SER)
    - Chattanooga Extra Shelf (code 4230)

Instructions for Use

  • Maintenance:
    - Do not use bleach or cleaners with high chlorine content
    - Do not use paper clips, safety pins, staples, coat hangers, etc., in, on, or near the unit
    - Do not clean the unit with carbon steel wool or a carbon steel brush
    - Use only soft cloth, Scotch-Brite type scouring pads of green, blue, or white abrasiveness, or stainless steel wool if absolutely necessary
    - Do not use abrasive cleaners which tend to disturb the grain in the finish, especially on the exterior of the unit
    - For exterior cleaning, use only non-abrasive stainless steel polish
    - Water level is critical: Add water daily, if necessary, to keep unit full
    - Regularly clean and drain the tank (every two weeks)
    - Failure to properly maintain the unit will cause premature wear and will void the warranty
    - Remove all deposits from interior surfaces and parts
    - The deposits are concentrations of minerals that will allow rusting to begin
    - If allowed to accumulate on the heating element, these deposits will lower the
    efficiency of the element and increase the power consumption of the unit
    - Exercise extreme care if cleaning the element or thermostat(s)
    - These components can be easily damaged without proper care or caution
    - If you suspect that you have hard water, you may need to change the water and clean the unit more frequently
    - Salt deposits are an indication of hard water that will eventually cause rust
  • Cleaning Tips:
    - Check for low or no chlorine content in your cleaner and make sure that the residue is thoroughly rinsed away with water
    - strong solution of vinegar and water may be used to dissolve away deposits, which then must be thoroughly rinsed away
    - Results may vary
    - For exterior cleaning, use stainless steel polish and a soft cloth only
    - Numerous industrial stainless steel polishes are available from various supply companies
    - Use of any cleaner except stainless steel polish on the exterior of the unit is not recommended
    - Abrasive cleaners and scouring pads can damage the finish of the unit

Warranty

1 Year warranty

Customer Reviews

Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*


Submit Cancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.rehab-store.com

Close