Breg Integrity Fracture Walker Boot

What to buy with Breg Walker Boots

1. Remove the boot's liner by unfastening all straps. Apply liner to the patient with the ankle at a 90-degree angle and the foot flat on the floor by wrapping the foot and ankle with the liner and fastening the hook & loop. Note: If additional padding is necessary to cover a sensitive area or for a more secure fit, you may use the provided spacer pads.
2. Pull the uprights apart and slide the leg into the walker frame. Take care to position the ankle at a 90-degree angle and the uprights centered along the medial and lateral sides of the lower leg. Once the lower leg is in position, pull off the felt strip covering the inside of the uprights.
3. Starting with either the proximal or distal strap, fasten all straps so that they are snug and the patient feels secure in the walker.
4. After applying the walker, locate the blue pump bulb (If air version) and release the valve on the top strap of the fracture walker liner.
5. After locating the pump, repeatedly squeeze to fill the internal air bladder. The air bladder should be filled according to the patient’s comfort level. If the liner becomes too full or needs to deflate the liner, simply open the release valve lid and press the release valve. To re-inflate, repeat Step 4.

How to care for Walker Boot?

• Hand wash in cold water with a mild detergent, rinse and lay flat to air dry.

Warning:

• Carefully read fitting instructions and warnings prior to use. To ensure proper performance of the brace, follow all instructions.
• If you experience an increase in pain, swelling, skin irritation, or any adverse reactions while using this product, immediately consult your medical professional.
• This device will not prevent or reduce all injuries. Proper rehabilitation and activity modification are also essential parts of a safe treatment program. Consult your licensed health care professional regarding safe and appropriate activity levels while wearing this device.

Caution:

• Follow the application and care process described in the instructions.
• For single-patient use only.

Specification

Customer Reviews