Skil-Care ChairPro Seat Belt Alarm System With Grommets

More Information

• Wheelchair Belt Installation (Grommet):
  1. Remove the rearmost screws from the left and right sides of the wheelchair seat.
  2. Remove the grommets from the screws, place screws through the grommets at the ends of both belt sections, and refasten the screws to the wheelchair seat.
  3. Select either hole in belt depending upon desired length, closer holes will yield a shorter length, holes closet to the end will yield a longer length.
  4. Attach the two spade€ connectors on the connector wire to those on the seat belt. Note, that for removable arm wheelchairs it may be easier to install the belt after the arm is removed.
  5. Place connector cord through the space between the wheelchair seat and backrest. Make certain that it is away from wheels and other moving parts.

Customer Reviews