Salter Clear Oxygen Supply Tubing

How to Use Salter Oxygen Tubing with 3 Channel?

• Wash your hands. Open the package and remove Oxygen Tubing
• Insert the tapered end of the connector into the Oxygen Tubing end connector
• Insert the other tapered end of the connector into the end connector of the nasal cannula or oxygen mask tubing
• Give the tubing a gentle tug to check for a tight connection
• Attach the other end of the Oxygen tubing to the outlet port on the bubble humidifier bottle or the outlet port on the oxygen device
• Set prescribed liter flow rate. Check for gas flow from nasal prongs or oxygen mask

Note:

If the tubing becomes soiled, wipe it down with a damp cloth. Do not use any strong detergent, disinfectant, or oil-based soaps to clean the tubing

Safety Instructions of Salter Oxygen Supply Tubing

• Use oxygen as prescribed by your doctor
• Do not kink, bend or tie your oxygen tubing
• Keep extra oxygen supplies available for backup
• Do not set anything on the tubing that may obstruct the flow
• Do not place oxygen tubing under blankets, bedsheets, rugs, etc
• Keep oxygen tubing at least 6 feet away from flames or any heat source
• Do not smoke or allow anyone to smoke around you when oxygen is being used
• Do not use flammable products around oxygen, such as aerosols and cleaning products
• Keep excess tubing loosely coiled and out of the way to prevent tripping on oxygen tubing
• Recommend the use of a swivel adapter to reduce the possibility of twisting for nasal cannula and supply tubing longer than 14 ft
• The total length of the oxygen tubing and nasal cannula should not exceed 57 feet. This is to ensure there is enough pressure to deliver your prescribed oxygen

Customer Reviews