Rolyan Walker Splint

Rolyan Walker Splint

  • Made in USA

Item A7672, A7671, A7674 is backorder and will be available to purchase once it is back in stock.

Rolyan Walker Splint is made of polyform splinting material with a Kushionflex pad and includes straps. It can easily be adapted with a heat gun or hot water. Rolyan Walker Splint helps people with a weak grip hold onto a walker handle. To size, measure width of hand at knuckles, not including the thumb.

Rolyan Walker Splint Benefits

  • Maintains wrist alignment
  • Made of Polyform splinting material and Kushionflex pad
  • Ideal for increasing grip
  • Can be trimmed to fit
  • Comes with straps

Item # Desc Pkg Price
A7673 Large, Left, 3.5" to 4" (8.9cm to 10.2cm) Each

Features of Rolyan Hand Splint for Walker

  • Excellent for Increasing Grip:
    • The Rolyan Walker Splint is ideal for maintaining wrist alignment.
    • It solves the problem of positioning a weak or "Hemi" hand on a walker.
    • To determine the right size for you, measure the width of your hand at the knuckles, not including the thumb.
  • Kushionflex Pad provides cushioning:
    • The splint is constructed with Polyform splinting material and a Kushionflex pad.
    • The Kushionflex pad can be placed on the splint where the heel of the hand rests.
    • It can be trimmed to fit before reapplying the self-adhesive to the splint.
    • The splint comes with straps to ensure compliance and control.

What to buy with Handle Grips for Walkers

How to use Rolyan Polyform Walker Hand Splint?

  • Splint should be positioned over the walker handle so that the thumb fits into the side opening.
  • Attach the hook tabs to the underside of the splint where it curves away from the walker and attach the strap to one of them.
  • Place the splint over the walker handle
  • It should be snug enough so it does not rotate on the walker handle and at the same time it should be loose enough to be removed without excessive effort.
  • If the Rolyan Walker Splint requires adjusting, spot heat the polyform splint with a heat gun or in a heat pan of water at a temperature of 150 degree to 160 degree F (65 - 70 degree C) until pliable.
  • Heating the whole splint may cause it to lose its performed shape.
  • Kushionflex pad can be placed where the heel of the hand rests on the splint.
  • Trim it to fit as required before applying the self-adhesive back to the splint.

Rolyan Walker Splint cleaning instructions:

  • The splint will lose its shape in temperatures over 135degreeF (57degreeC)
  • It should be kept away from sources of heat such as ovens, hot water, open flames, and sunny car windows
  • The splint can be cleaned with soap and lukewarm water.
  • Avoid wetting the adhesive on the hook tabs and the optional Kushionflex pad.
  • The strap can be washed with soap and water.
  • The splint and strap should be allowed to dry thoroughly before reuse.


  • This splint is to be filled initially by a healthcare professional who is familiar with the purpose for which it is prescribed.
  • The healthcare professional is responsible for providing wearing instructions and precautions to other healthcare practitioners, care providers involved in the patients care and the patient.
  • If unusual swelling, skin discoloration or discomfort occurs, use should be discontinued and a healthcare professional consulted.
  • Be careful that the strap is not so tight that it interferes with circulation.
  • After heating splinting material, always check its temperature before applying it to the patient.
  • For safety in case, the patient falls while using the walker, the splint should not be permanently attached to the walker.

Rolyan Walker Splint Specification

Size Dimension (In Inch) Dimension (In cm)
Small / Medium 3"- 3.5" 7.6 Cm - 8.9 cm
Large 3.5" - 4" 8.9 Cm - 10.2cm

Customer Reviews

Please enter your and your friends email address below.
Fields marked with * are compulsory

Submit Cancel
The selected product information has been successfully emailed to your friend.

Thank you for using