Prius Healthcare Duet Mattress System

Name: Prius Healthcare Duet Mattress System
Brand: PRIUS HEALTHCARE USA
SKU: 63482
Price: 5653.39013671875 USD
Availability: InStock

Brand/Manufacturer: PRIUS HEALTHCARE USA

Prius Healthcare Duet Mattress System is a medium to high risk system for patients who are at risk of developing Pressure Ulcers according to sound clinical judgment. This can also be used for patients who have an existing stage 1,2,3 and 4 Pressure Ulcer, in conjunction with hospitals policy on pressure area management. This provides constant low pressure by redistributing the patient pressure over a greater area than a standard mattress.

Duet Mattress Highlights

8” air cell mattress replacement
3‐1 alternation and static
Low air loss therapy
Pulsation therapy
40 Degree lateral rotation therapy
2” convoluted foam base

Shipping Charges Applicable

Item #	Desc	Pkg	Price
PHR-DUET36Q	36" Mattress System	Each	$7349.45 $5653.39
PHR-DUET42Q	42"Mattress System	Each	$7816.35 $6012.59
PHR-DUET48Q	48" Mattress System	Each	$8282.95 $6371.49

Duet Mattress System Features

Prius Healthcare Duet Mattress System has user-friendly controls
Features large LCD display and rapid CPR deflation
Patient Care mode provides quick maximum inflation within seconds to help transfers and nursing procedures
Incorporates sensor technology with Auto Mode to continuously monitor the mattress pressure based on patients height and weight
Lock out function prevents tampering with settings
Fowler mode gives added support to help prevent bottoming out while patient is in a sitting position
Low Air Loss, Pulsation, Alternation, Static and Lateral Rotation for outstanding pressure redistribution results
Highly vapor permeable and oversized pliable quilted nylon top cover providing low shear, friction and moisture protection
Rapid CPR deflation 2 inch convoluted foam base for additional safety support
Recommended maximum safe working load up to 600 lbs
Auto Fowler–no loss of therapeutic benefits in upright positioning
Auto Set – automatically sets optimal pressure based on weight/height and position Patient Care provides immediate firm surface
High vapor permeable and quilted nylon cover
Visual and audio alarms for power failure, bed exit and bottoming out with alarm mute function
10 electronic adjustable comfort settings
Modularized design for air mattress
Integrated power cable retainer
Integrated glide sheet to base cover for easy transferring
Quick CPR deflation within 20 seconds

How to use Prius Healthcare Duet Mattress System?

Remove the existing mattress from the bed frame.
Replace the standard mattress with the Duet LAL Alternating Anti-Decubitus mattress replacement system (position the mattress so that the air tube is at the foot of the bed).
Secure straps beneath the mattress to the bed frame.
Position the control unit on the foot board of the bed frame.
Attach the air tube connector to control units socket.
Verify that air hoses are not kinked under the mattress.
Attach cover to mattress.
Check CPR release to ensure it is set to the Close position.
Plug in the control unit and turn on the power switch located on the lower left corner of the control panel (the STANDBY LED will illuminate).
Press the Standby/Operate switch button on the control panel (Operate LED will illuminate and the control unit will be operational).

How to clean Prius Healthcare Duet Mattress System?

The mattress should be cleaned on the bed weekly using a damp soft cloth and mild detergent.
If top cover or base cover becomes grossly soiled, put on clean gloves, plastic gown and eye protection and, remove top and base covers.
Dispose of in accordance to your facilities standard operating procedures for handling contaminated waste, replace with clean covers.
Prius Healthcare Duet Mattress System - Brochure

Duet Mattress System Specification

Specifications	Values
Control Unit Dimension	41” (L) x 26” (W) x 25” (H)
Control Unit Weight	14.9 lbs
Cycle Time	Alternation: 3~95 min Hold and Turning: 3~95 min
Min Operating Pressure	15 +/- 4mmHg
Max Operating Pressure	52 +/- 4mmHg
Rated Voltage	AC 110-120V
Rated Frequency	60 Hz
Fuse Rating	5A 250V
Max Current	5A
Classification	Class I, Type BF Not AP or AGP type
Matterss Size (inch) L x W x H	80” x 36” x 10”
Matterss Weight	39.6 lbs
Matterss Weight Capacity	600 lbs for 36”, 800 lbs for 42”, 1000 lbs for 48”
Cell Number	18 cells
Cells Material	Nylon coated with PU
Cover Type	Zipper cover
Cover Material	Nylon woven fabric w/PU coating finish
Base Material	Woven Polyester fabric w/PVC backing

Customer Reviews

Please enter your and your friends email address below.

Fields marked with * are compulsory


Your Name: *	Error msg
Your Email Address: *	Error email
Friend's Name: *	Error fname
Friend's Email Address: *	Error remail
Message:
Captcha:	Hcaptcha Gcaptcha
	Submit Cancel