Harmar AL100 Universal Scooter Lift

Name: Harmar AL100 Universal Scooter Lift
Brand: HARMAR MOBILITY
SKU: 56
Price: 2225.00 USD
Availability: InStock

Brand/Manufacturer: HARMAR MOBILITY

Non Returnable
Made in USA

Note: We would require Vehicle Information (Year, Make and Model) and Chair/Scooter information (Make and Model) to process your order. You can email us the information by clicking HereÂ or you can use the Order Comments section while placing the order for this product.

Harmar Calculator: To learn which Harmar lifts are suitable with your vehicle and mobility device? Our Compatibility CalculatorÂ can help.

Harmar AL100 Universal Scooter Lift features Harmar Stars -N- Stripes aluminum deck, designed and engineered for maximum strength and durability. The unique hold-down foot automatically secures virtually any scooter without any necessary scooter modifications. This fully automatic Harmar AL100 offers simple, nearly effortless operation and a hefty 350-pound lifting capacity.

Harmar AL100 Universal Scooter Lift Highlights

Works with virtually any scooter/auto application
Automatic hold-down foot safely secures scooter
Easy one switch operation, license plate light and courtesy lights standard
Lifting capacity: 350 lbs.

Item# AL100

ORDERING DETAILS

Total: $3178.59
Total: $2225

Total: $3178.59
Total: $2225

Harmar AL100 Universal Scooter Lift Features

Harmar AL100 fits virtually all scooters
Platform fold automatically when not in use
No scooter modifications required
Integrated license plate holder
Automatic hold down arm
Manual crank backup
Large aluminium deck
Accommodates scooters with a wheelbase of up to 42"
License plate mount included
One Switch Operation
Automatic hold-down foot and rear wheel cradle
To complete this order we would also require your vehicle information (vehicles year, make, model) and mobility equipment information (wheelchair/power chair/scooter manufacturer, model etc.) We will call you for the same

How To Operate Harmar AL100?

Setting Hold-Down Foot Height

With the platform on the ground, run both nuts down onto the Hold-Down Foot, so the Foot will not catch onto the Scooters Deck. Drive the scooter onto the platform, from left (drivers side) to right, until the rear wheels are positioned in the Cradle Bar assembly. Stop when the rear tires contact the ramp of the platform
Raise the platform until you hear the motor clutch, which indicates the top of travel. The HoldDown Foot should be above the Scooters Deck
Raise both nuts on the Hold-Down Foot and allow the Foot to rest on top of the Scooter Deck. While holding the Stationary Nut, run the Bottom Nut up to the Hold-Down Arm and had tighten. Lift the Hold-Down Arm up to eliminate slack and to ensure the Arm is at its highest point. There should be pressure on the deck of the scooter and the bottom Lock Washer should be compressed from the Bottom Nut
Adjust the Top Nut, so that the top of the nut measures 2.25" to 2.50" above the top of the Hold-Down Arm. Once the measure has been set, DO NOT adjust the Top Nut or the Stationary Nut
Lower the platform about 5" to relieve pressure from the Scooter Deck. While holding the Stationary Nut in place, run the Bottom Nut up to the Hold-Down Arm and tighten

Harmar AL100 Universal Scooter Lift Specification

Particulars	Dimensions
Lifting Capacity	350lb
Installed Weight	83lb
Type of lift	Outside lift
Hitch Height	5" to 18"
Hitch Class	II or III
Aluminum Deck Size	27.5"W x 39"L (adjustable to 47")
Maximum Scooter Width	28.5"
Maximum Scooter Wheelbase	42"

Warranty

3 year transferable warranty

Customer Reviews

Please enter your and your friends email address below.

Fields marked with * are compulsory


Your Name: *	Error msg
Your Email Address: *	Error email
Friend's Name: *	Error fname
Friend's Email Address: *	Error remail
Message:
Captcha:	Hcaptcha Gcaptcha
	Submit Cancel