Graham-Field Everest & Jennings Traveler SE Plus Wheelchair

How to Use Traveler SE Plus Wheelchair?

Balance:

• Proper balance is the key to maintaining the stability of your wheelchair. 
• Reaching, bending, and transferring to or from a wheelchair will change the weight distribution and center of gravity of you and your wheelchair. 
• When performing such activities, do so as instructed in the following paragraphs to avoid tipping the wheelchair

Transfer Activities:

• Always ensure that the wheelchair is on a stable, level surface and engage wheel locks before transfer 
• Do not step on the footplates; this could cause the wheelchair to tip. Fold them up, and either detach them or swing them aside 
• There is a critical moment when there is little or no seat platform beneath you. Take every precaution to reduce this unsupported distance before you attempt the transfer
   

Warning:

• When wheelchair is in use, anti-tippers must be installed in the downward position 
• Indicates a potential hazard situation or unsafe practice that, if not avoided, could result in death or serious personal injury 
• Indicates a potential hazard situation or unsafe practice that, if not avoided, could result in product or property damage
• Do not operate this wheelchair on streets or roadways 
• Do not operate this wheelchair on hilly or rough terrain, sand, wet or icy surfaces, or surfaces with impaired traction. Ensure that pathway is clear of all obstacles 
• Do not turn wheelchair while going downhill, as wheelchair could tip over 
• This wheelchair does not offer seating or occupant restraint equivalent to the seat provided in a motor vehicle! To increase your safety while traveling in a motor vehicle, always transfer to the vehicle seat and use the restraint provided by the vehicle manufacturer 
• Do not tie down or attach anything to the wheels. This could cause tipping and possibly result in injury or damage to the wheelchair 
• Doing a wheelie (tilting the wheelchair backward until it reaches its balance point) is dangerous and could result in personal injury to the user 
• Do not place your hands between seat rail and side panel 
• Ensure that wheelchair is on a stable, level surface and engage wheel locks before and during transfer - Wheel locks are not brakes. Do not use the wheel locks to slow down your wheelchair, or while the wheelchair is moving. Wheel locks are only intended to keep the wheelchair in place when it is at a complete stop
   

Specification

Warranty

1 Year Limited Warranty

Customer Reviews