Etac Hi-Loo Raised Toilet Seat with Armrests

More Information

• Undo the four fixing screws. The screws should be loosened only. Do not remove completely
• Move the four brackets towards the outside of the seat. Tighten the screws so that it still will be possible to turn the brackets one more click.
• Place the Hi-Loo on the toilet bowl and adjust it until there is contact at the front of the bowl.
• Turn the rear and front brackets at the side towards the bowl.
• Slowly lift the Hi-Loo away from the bowl. Turn all four brackets one click inwards. Now tighten the screws. Important: The brackets must remain in position
• Attach the Hi-Loo to the bowl, front brackets first. Then use downward pressure to secure the rest of the Hi-Loo to the bowl. Check it is securely attached.

• Clean/disinfect the chair with normal non-abrasive cleaning agents with a pH value of between 5-9, or with 70% disinfectant solution. Rinse and dry. The product is otherwise maintenance-free
• The product can withstand cleaning in a sterilizer at 85°C for 3 minutes. This applies for reconditioning
• Maximum user weight (see technical data)
• A defective product must not be used
• Heated chair can cause burns. The materials used are corrosion-resistant. The materials used are resistant to all general disinfectants

Specification

Customer Reviews