Duralife Bath Tub Shower Chair With Suction Cups

Duralife Bath Tub Shower Chair With Suction Cups

Brand/Manufacturer: DURALIFE
Save
Authorized Retailer Badge
  • HyGiene Products
  • Non Returnable
  • FSA Approved

Duralife Bath Tub Shower Chair With Suction Cups is made of furniture-grade tubular PVC plastic with a vinyl-coated polyester mesh seat. It is designed for use in the bathtub or shower with suction cups for attaching to the floor of the tub. The Bath Tub Chair measures 18"L x 17"W x 31"H.

Item # Desc Pkg Reward Price
DLF-85 Royal Blue - Mesh Each $8.26
$357.75
$275.19
DLF-85 Lipstick Red - Mesh Each $8.26
$357.75
$275.19
DLF-85 Beige - Mesh Each $8.26
$357.75
$275.19
DLF-85 Teal - Mesh Each $8.26
$357.75
$275.19
DLF-85 Dove Grey - Mesh Each $8.26
$357.75
$275.19
DLF-85 Yellow - Mesh Each $8.26
$357.75
$275.19
DLF-85 Wedgewood Blue - Mesh Each $8.26
$357.75
$275.19

Features

  • Note: This product cannot be exchanged or returned due to hygiene reasons.

Duralife Product Care

All Duralife products are made from the highest quality furniture grade PVC  pipe.

As with any healthcare product, it should be checked periodically for any damage occurring from daily use. Fittings and joints should be checked at this time also.

CLEANING INSTRUCTIONS

PVC Pipe

Use a soft cloth and wash with soap and water or any non-abrasive cleaner. Disinfectants may be used as required. Use alcohol or acetone on any deep scratches or markings. Swing armchairs are not watertight and disinfectant can be used inside the pipe. Let the solution drain out of the bottom of the chair before transporting.

Polyester Fabric

Prepare a cleaning solution using 1 tablespoon of liquid dish detergent and 2 tablespoons of household bleach mixed with 1 gallon of water. Use a sponge or soft cloth dampened in the solution. Remove the solution with a sponge or soft cloth and clean water. Use a brush in a circular motion to reach crevices. Disinfectants may be used as required. DO NOT TUMBLE DRY.

Casters

To install casters in a shower chair and other products:

  1. Turn product upside down on a protected surface.
  2. Align the caster stem with the hole in the caster socket and tap in with a soft-faced hammer. Casters should be lubricated on a routine basis with a silicone lubricant. Hair and any foreign material should be removed from around the axel.
  3. Drain holes in the bottom of the caster fittings should be checked for blockage. Insert a small wire in the hole to remove any accumulated debris.

Caution:- Products are made of plastic pipe. Do not store near a heat source.

Customer Reviews

Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*


Submit Cancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.rehab-store.com

Close