Drive Poly-Fly Lightweight Transport Chair Wheelchair

More Information

• Maintenance Tips:
  - Proper care and maintenance is important in order to keep your Wheelchair/Transport Chair in good working condition.
  - Be sure that your chair is in proper working condition at all times.
  - At least once a week, wipe off chrome using a clean soft cloth. If the chair is exposed to moisture, dry the chair immediately.
  - The metal parts of the chair should be polished once a month with an auto wax.
  - Clean the upholstery with a mild soap solution, rinse and wipe dry. Worn or torn upholstery should be replaced promptly as it may not support your body weight.
  - Inspect the wheels at least once a month. Correct any side play by loosening the lock nut on the axle, then tighten the axle just enough to remove side play.
  - Solid rubber tires require limited upkeep, but need to be cleaned periodically with a damp cloth.
  - Solid rubber tires need to be replaced if they become cracked or severely worn.
• Safety Tips:
  - Before entering or leaving the chair, engage the dual wheel locks against the tires on both rear wheels.
  - Make sure the front casters are in the forward position before transferring into or out of the chair.
  - Do not move forward on the seat while leaning forward out of the chair. If it is absolutely necessary to do so, make sure the front casters are in the forward position.
  - If you are picking an object up from the floor, go past the object, and then go backwards. The casters will then swing to the forward position.
  - Leaning out of the transport chair without proper assistance could cause tipping.
  - Do not step on the footplates when transferring, as this could cause tipping
• Note: The Poly-fly wheelchair/transport chair does not conform to Federal Standards for automobile seating and should not be used as a seat in a motor vehicle.

 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Specification

Warranty

Lifetime Limited Warranty

Customer Reviews