Drive Nitro Duet Rollator and Transport Chair

How to use Drive Nitro Duet Rollator and Transport Chair?

• Instructions for Use as a Rollator
  - Press and hold the red button on the footrest and move the footrest to the vertical position. Flip the backrest forward. Squeeze the armrest triggers to move them to the down position
   
• Instructions for use as a Transport Chair
  - Flip the backrest backwards and the armrests up. Press and hold the red button on the footrest and move the footrest down. Repeat for the other side
   
• Unfolding The Nitro Duet
  - Position the Nitro Duet on its wheels. Open the Nitro Duet. Press the tubes attached to the seat downwards until they lock into position
   
• Height Adjustment
  - Press and hold down the red release buttons. Simultaneously move the handgrip up or down. When the desired height is reached, let go of the red release buttons and the handgrip will automatically lock into the next possible height position
   
• Braking / Locking
  - Pull both brake levers upwards to apply the brakes while the Nitro Rollator is moving. Always brake slowly and steady.
  - Press both brake levers down to apply the locks while the Nitro Rollator is stationary.Pull up the brake levers and release to release the locks.
  - The effect of the brakes can be affected by abrasion of the wheel
   
• Adjustment of Brakes
  - The brake system fitted on this rollator complies with the manufacturer’s quality standards. The brake system has been preset (adjusted) to the best performance settings. To better suit you personally, please follow the instructions set out below. You may need to adjust the brake systems from time to time as they will wear out with normal use. To adjust the braking strength, adjust the brake by pressing the screw housing downwards and then turn left or right

Safety Instructions

1. Please make sure the Nitro Duet is fully opened and the seat is down.
2. Be sure the handgrips are at equal height.
3. Test the brakes before operating the Nitro Duet. When wheels are locked (see illustrations for locking and releasing locks previously in this manual), lock bar on rear wheels should prevent wheels from rotating. If the wheels rotate while locked, please take unit back to dealer for adjustment. When the brakes are released, the wheels should rotate freely.
4. Always lock the brakes before sitting and do not use seat when unit is on an incline or uneven ground.
5. Replace wheels when significantly worn or damaged.
6. Before entering or leaving the chair, engage the dual wheel locks on both rear wheels. Make sure the front casters are in the forward position before transferring into or out of the chair.
7. Leaning forward while using the Nitro Duet as a transport chair without proper assistance can cause tipping.
8. Do not expose the product to temperatures above 104°F for an extended period of time, as this can cause the Nitro Duet parts to overheat and burn the user.
9. Please make sure the Nitro Duet is fully opened, seat is down and the folding bar under seat is locked in the down position.
10. Be sure that both knobs are fully tightened and are at equal heights. Test the Nitro Duet for stability before applying weight to hand grips.
11. Regularly check the screws and fasteners on the Nitro Duet and tighten if necessary.
12. This item should never be used in a moving vehicle.
13. When exiting the transport chair
    - Engage wheel locks by pressing down on brake handles
    - Remove feet from footrests first and place firmly on the ground
    - Then use armrests for support before attempting to stand up Assistance is always suggested
14. Use bag only for transport of objects and do not overload. Maximum load: 11 lbs.

Specification

Warranty

Lifetime Limited Warranty

Customer Reviews