Drive Med Aire Plus 8 Inch Alternating Pressure and Low Air Loss Mattress System

Drive Med Aire Plus 8 Inch Alternating Pressure and Low Air Loss Mattress System

Brand/Manufacturer: DRIVE MEDICAL
Authorized Retailer Badge
  • HyGiene Products
  • Non Returnable

Drive Med Aire Plus 8 Inch Alternating Pressure and Low Air Loss Mattress System is designed to prevent, treat and manage pressure ulcers in the home, long term care, or acute care setting. This combination therapy system provides both alternating pressure and low air loss to optimize pressure redistribution and manage skin maceration. Cell-on-cell design of 8 inch deep air cells prevents Bottoming Out and also provides up to 24 hours of power outage protection.

Item # Desc Pkg Price
14029 36"W x 80"L x 8"H Each


  • Drive Med Aire Plus 8 Inch Alternating Pressure and Low Air Loss Mattress System features Auto-Firm, Seat Inflate, auto-recovery, microprocessing feedback and lock-out
  • Digital pump allows for customization to individual patients comfort and safety needs
  • Auto return to alternating pressure mode if system is left on static mode for more than 2 hours
  • Deluxe 4-way stretch cover is low shear, fluid-resistant, vapor permeable, quilted and zippered
  • Each one of the 20, 8" deep air bladders are easily removed and replaced
  • Pillow function maintains the 3 air cells at the head of the bed in static mode for patient comfort
  • 3 diagnostic alarms tell you whether a problem is with the mattress or the pump for more efficient servicing
  • CPR valve allows for rapid deflation
  • Comes with EZ Lock/Quick Release Tubing connector
  • Weight capacity: 450lb

More Information

  • Handling and storage:
    - Lay the mattress out flat and upside down
    - Roll from the foot end towards the head end, the foot-end strap can then be stretched around the rolled mattress to prevent unrolling
    - Do not fold, crease or stack the mattress
  • Maintenance:
    - Check the power cord and plug to see if there are abrasions or excessive wear
    - Check the mattress cover for signs of wear or damage
    - Ensure the mattress cover and tubes are connected together correctly
    - Plug in the pump and check the airflow from the hose connection port
    - The airflow should alternate between ports every half-cycle time
    - Check the air hoses to see if there are kinks or breaks
    - Make sure the mattress tube is well connected
    - Check the pump and make sure both power and power indicator are off when the switch is turned off
  • Low pressure examination:
    - Examine if there is air leakage between the pump and the mattress connections or from the air mattress tubes
    - Check connectors between the air mattress and pump
    - If there is any disconnection, please reconnect it
    - Check the CPR valves and ensure their outlets are sealed
    - Check the air-connecting tubes
    - Ensure each single cell is not broken
    - Turn the pressure-adjust knob to Firm
    - Keep the tubes fully inflated and inspect for air leakage
    - Check if there is any air leakage from cells
    - Ensure no leakage occurs

Warning WARNING: Cancer and Reproductive Harm -




Control Unit Airflow

8 LPM (Litres per Minute)

Control Unit Cycle Time

10, 15, 20, 25 minutes

Control Unit Type


Control Unit Alarms


Mattress Cover Material

Fluid Resistant Stretch

Weight Capacity



18 Month limited warranty

Customer Reviews

Please enter your and your friends email address below.
Fields marked with * are compulsory

Submit Cancel
The selected product information has been successfully emailed to your friend.

Thank you for using