Clarke Aquatec Battery Power Bathlifts With Reclining Back For Standard Tubs

Clarke Aquatec Battery Power Bathlifts With Reclining Back For Standard Tubs

Brand/Manufacturer: CLARKE HEALTH CARE
Save
Authorized Retailer Badge
  • HyGiene Products
  • Non Returnable
  • FSA Approved
  • Latex Free

Clarke Aquatec Battery Power Bathlifts With Reclining Back For Standard Tubs will give user the confidence and ease to safely get in and out of the tub with out the worry of slipping or falling. At bottom of lowering, back support will recline. Lift lowers to within 2-3/4-inch from bottom of tub. At top of tub, the side seat flaps will lay out on top edge for easy transfer off seat. Bathlifts include drain holes in base to reduce water and dirt collecting in bottom plate, a flat seat for more comfort, integrated holder on back to hang the hand control and predrilled holes to mount accessories.

Aquatec Battery Power Bathlifts Highlights:

  • Backrest with built-in neck support
  • Lithium-ion battery with discharge protection
  • Self release suction cups
  • Back support reclines to 40°

Item# A157

  • ORDERING DETAILS
  • Total: $1911.19
    Total: $1720
Total: $1911.19
Total: $1720

Clarke Battery Power Bathlifts Features

  • Aquatec Wide model for whirlpool style tub
  • Non-slip textured surface
  • Lowers to 2.5" from bottom of tub for maximum water coverage
  • High backrest with molded neck support can be folded forward by just one hand
  • Maintenance-free actuator is both powerful and silent
  • Stable and rust-free frame, reinforced lifting scissors and bottom plate
  • Hand remote has easily identified up and down buttons and low power indicator
  • Disassembles into easy to carry parts, back, seat and hand control
  • Rechargeable battery and charger included
  • Comes with removable, washable covers
  • Battery will provide up to 6 lifts per charge, recommend that user charge after each use for optimum battery life
  • User Manual

More On Aquatec Reclining Bathlifts

Maintenance and safety check:

  • The hand control may only be opened by the manufacturer of the lifter
  • When used properly, the bath lift is maintenance-free
  • Before you use it, check for any visible damage. If you detect damage, contact an authorized workshop
  • To maintain the functional reliability of your bath lift, it should be inspected by an authorized workshop each time it is reinstalled or after 24 months
  • Only authorized dealers are permitted to perform required repairs
     

Caution:

  • There is a risk of injury from electric shock
  • Before cleaning the charger, always pull the plug out of the power socket
  • Never plug objects made of conducting material (e.g. knitting needles, metal pins) into the jack socket of the hand control
  • Only use a dry cloth to clean the charger. Important! The hand control may only be opened by the manufacturer of the lifter

Specification

Particulars Aquatec Aquatec Wide
Seat Width without Sideflaps 14.75" 14.75"
Seat Width with Sideflaps 27.88" 35.5"
Sitting Area Length 19" 19"
Height 5" 15"
Outside Packaging 28 X 16 X 12 in 28 X 16 X 12 in
Seat Width Range 14.75" - 27.88" 14.75" - 35.5"
Back Width 14" 14"
Dimensions (Folded) 23 X 15 X 8 in 23 X 15 X 8 in
Load Capacity 300lb 300lb
Height Seat to Floor 17" 17"
Back Height 26" 26"
Seat Depth 19" 19"
Backrest Angle 40° 40°

 

Warranty

Aquatec has a limited three year warranty against manufacturer;s defects. Covers, battery and suction cups are excluded.

Customer Reviews

Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*


Submit Cancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.rehab-store.com

Close