Chattanooga Hydrocollator E-2 Stationary Heating Unit

Chattanooga Hydrocollator E-2 Stationary Heating Unit

Brand/Manufacturer: CHATTANOOGA GROUP
Save
Authorized Retailer Badge

Chattanooga Hydrocollator E-2 Stationary Heating Unit is a benchmark against which all other heating units are judged. It is made of high quality stainless steel with thermostatically controlled temperature. Almost indefinite life ensures a constant supply of temperature-consistent HotPacs. It is durable and easy to maintain. It has smaller capacity, yet able to hold oversize hotPacs.

Item# 2802

  • ORDERING DETAILS
  • Total: $1300.85
    Total: $1000.69
Total: $1300.85
Total: $1000.69

Chattanooga Hydrocollator E-2 Stationary Heating Unit Features

  • Chattanooga Hydrocollator E-2 Stationary Heating Unit is simple to fill and drain
  • Thermostatically controlled temperature
  • No plumbing is required
    It includes:
    - 2 oversize
    - 1 neck contour
    - 3 standard size hotPacs

Caution

- The thermostat is extremely sensitive and the slightest adjustment will alter the temperature several degrees
- The temperature of the water should be checked with a thermometer after every adjustment, before using the HotPacs
- The recommended operating temperature is 160°F to 166°F (71°C to 74°C)
- Always keep the water level over the top of the HotPacs to avoid burning or scorching of the packs
- Never allow the HotPacs to dry after use Check water level daily as it has a natural loss due to evaporation
- Do not move the Hydrocollator while filled with water
- Tipping over could result in burns to the user or others
- Always unplug the Hydrocollator from the power source before attempting to empty water from unit
- Make certain the unit is electrically grounded by plugging into a hospital grade electrical outlet with a ground terminal receptacle (U-ground outlet), 120 VAC only
- Always replace Hydrocollator HotPacs as soon as they show signs of wear

Specification

Particulars Details
Mains Power 110 to 120 V, 50/60 Hz
Power Consumption 1000W
Tank Capacity 11 gallon (43L)
Temperature Range 160°F to 165°F (71°C to 74°C)
Thermal Cut-Out Temperature 180° to 185°F / 82° to 85°C
Accuracy +/-10%
Heat Up Time to 160°F ( 70°C) 4 hour
Cool Down Time from 160°F (70° C) 2 hour
Fiberglass Insulation No

Warranty

1 Year warranty

Customer Reviews

Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*


Submit Cancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.rehab-store.com

Close