Breg Genesis Full Shell Walker

More On Breg Genesis Full Shell Walker

• Fitting Instructions:
  - Loosen all of the straps
  - Detach the plastic anterior plate
  - Open the foam boot cuffs so that it is easy to insert the foot and calf inside
  - Place foot into the foam boot so that the heel sits securely against the back of the boot
  - Make sure the foot is flat on the innersole
  - Starting with the foot section of the foam boot, fit the boot by overlapping the cuffs
  - One side has a hook closure that will attach over the opposite side
  - First, pull the non-hook side of the cuff over the foot, then pull the hook side over and secure when the desired fit is achieved
  - Repeat the process for the calf section of the foam boot
  - Re-attach the plastic anterior shell
  - There are hook and loop spots on the back to adhere the shell to the foam boot
  - Place the shell so the top is aligned with the top of the foam boot
  - Secure the strap on the top of the foot section
  - Insert the strap end through the black D-ring and pull to the desired tension on the strap
  - Next, secure the bottom calf strap
  - Insert the strap end through the black D-ring and pull to the desired tension on the strap
  - Repeat the process for the top calf strap
  - On the four strap configuration, secure bottom calf strap
  - Repeat the process for the middle and top calf straps
  - Push the air pump to inflate the air bladder to the desired patient comfort and support
  - The fitting process is complete
  - To deflate the air bladders, press firmly on the release valve until air has been released

Specification

Customer Reviews