Breg Airmesh Recover Open Back Wraparound Knee Brace

More About Recover Knee Brace

Application Instructions for Knee Braces:

• The wrap-on brace is applied with the closures in the front of the leg and the kneecap cutout centered over the knee.
• Secure the closures firmly.The straps should be tightened firmly, starting with the two straps closest to the knee.
   

Tips on Use and Care of Knee Brace:

• After exposure to salt water or dirt, thoroughly rinse the brace with fresh water and allow to air dry.
• A dry lubricant, such as Teflon spray, may be used on the hinge occasionally.
• Do not use wet lubricants.
• The hinge assemblies may be removed to allow easier washing of the sleeve and straps.
• Medical Professional:
  - The sidebars may be bent to accommodate individual legs. Bend in equal amounts above and below the hinge.
• Periodically inspect the sleeve, straps, and hinges for excessive wear. Be sure all screws are tight and stops are in place.
   

ROM Hinge Adjustments:

• Extension Limit settings may be selected between 10° of hyperextension and 70° by pulling the tab out and sliding to desired position.
• Flexion Limit settings may be selected between 10° of hyperextension and 120°.
• The hinge may be locked by sliding the quick lock button into the locked position at any one of 5 positions:
  - 10° of hyperextension, 0° (Neutral), 10°, 20°, 30°.
   

Note:

• Due to soft tissue compression, we recommend the use of extension stops at least 10° greater than the desired limit, (e.g., if you desire a 10° extension limit, use the 20° extension stop).

Specification

Customer Reviews