Medline Knockdown Bath Bench with Arms and Back

What to buy with Medline Bath Bench

• Essential Medical Deluxe Shower Mat
• McKesson Handheld Showerhead
• McKesson Shower Cap

How to use Knockdown Shower Chair?

Knockdown Bath Bench Assembly

• Place the seat bench upside down on the top of a raised flat surface Insert the mainframe with "A" imprinted on it into the indentation on the underside of the bench with and "A" imprinted on it
• Insert the mainframe with "B" imprinted on it, into the indentation on the underside of the bench with a "B" imprinted on it
• Secure the Center cross-section using the curved washer and a shorthand screw.
• Place the backrest frames across mainframes.
• Insert a longhand screw through each end of the backrest frame and mainframe.
• Insert a leg extension piece on all four legs of the mainframe.
• Depress the push button and adjust each leg extension to the same height on all four legs of the mainframe.
• Check that all push buttons fully protrude from the mainframe. Stand the chair upright.
• Attach the backrest to the backrest tubes with four shorthand screws. Insert an armrest on each side of the seat bench.
• Ensure the curved bar of the armrest extends outward from the bench.
• Depress the push button and check that the push button protrudes fully.

How to adjust the Shower Bench With Arms to the proper height while standing in front of the assembled bench?

• As if preparing to sit, the back of the user's knees should touch the seat bench. This should allow the user's feed to be firmly on the floor while properly seated.
• Adjust the leg extensions as needed by depressing the push buttons.
• Please check that the push button protrudes fully and that all leg extensions are adjusted to the same height.

Medline Knockdown Bath Bench with Arms User Manual

How to maintain Medline Bath Bench?

• Ensure that all four tips rest evenly on the floor
• Inspect the Medline bath bench for damaged or loose components and ensure that all parts are secure
• Check that all four legs are adjusted evenly
• Check the tips on the leg extensions for rips, cracks, or wear, and check the bench and backseat for cracks or ruptures in the plastic
• Do not use a bath bench if any of these are noted
• Clean with regular household cleaning products
• Use a non-abrasive cleaner with warm water
• Do not use abrasive powders or scouring paths

Warnings:

• Check to ensure that all screws joints and fittings on the backbench are tight
• When using the backrest, ensure the bench remains balanced
• Ensure all four legs are adjusted evenly and are free of any obstructions prior to use
• Excessive twisting or turning while seated on the bench may cause a loss of balance and damage to the product
• Check the bench for cracks or ruptures in the plastic
• Check that all push buttons are fully protruded from the mainframe through the leg extensions and are properly engaged
• Do not place bath bench on uneven surfaces
• Do not twist or turn while sitting on the bath bench. This may cause damage to the frame
• When transferring in and out of the unit, evenly distribute weight between the arm supports
• Check tips for rips, cracks, or wears if these conditions exist, do not use the backbench, and replace the tips immediately
• Do not use if wobbly, unstable, or not level
• Do not exceed the user weight capacity of 350 pounds or 159 kilograms
• Do not stand on the bath bench
• Do not adjust the leg extensions while seated on the bench
• Do not use the bath bench for anything but its intended purpose

 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Customer Reviews