Williams Sound Pocketalker 2.0 Personal Amplifier

Williams Sound Pocketalker 2.0 Personal Amplifier

Brand/Manufacturer: WILLIAM SOUND CORP.

Williams Sound Pocketalker 2.0 Personal Amplifier amplifies the sounds and voices most important to the user. By positioning the microphone close to the preferred sound, user can reduce distracting background noise. Ideal for everyday listening situations, including one-on-one discussions, television listening or conversing in the car. This slim, ergonomically designed amplifier could be easier to use. Simply plug in the headphone or earphone, position the microphone near the preferred sound, adjust volume to the comfort and start listening.

Williams Pocketalker 2.0 Highlights

  • Ergonomic, lightweight design
  • Extended high and low frequency range
  • Superior sound quality
  • Built-in T-coil loop compatible

Item # Desc Pkg Reward Price
PKT 2.0 4.9"L x 2.0"W x 1.0"H Each $6.00

Pocketalker 2.0 Personal Amplifier Features

  • Williams Sound Pocketalker 2.0 Personal Amplifier includes:
    • PKT 2.0 personal amplifier (includes internal microphone)
    • EAR 042 dual stereo isolation earphones
    • HED 024 stereo headphones
    • MIC 014-R plug-in (no cord) microphone
    • BAT 010-2 two AAA alkaline batteries
    • WCA 007 WC 3.5mm male to 3.5mm female cable with mounting clips
    • RCS 003 lanyard
  • Ergonomic, lightweight design
  • Extended high and low frequency range
  • Superior sound quality
  • Internal microphone
  • Compatible with telecoil-equipped hearing aids
  • Rechargeable ready
  • Also Available (Separately)
    Williams Sound Pocketalker 2.0 Rechargeable Battery Kit
Williams Pocketalker 2.0 User Manual

What to buy with Pocketalker 2.0?

How to Claen Pocketalker 2.0 Amplifier?

  • Use an alcohol wipe or 3% hydrogen peroxide solution to clean the outside of the Pocketalker case and the earphone/ headphone cord. Wiping cloth should be damp rather than soaking wet (see caution below). Lightly swab the unit down, as pressing hard may release liquid into the unit (see caution).
  • The Pocketalker can be carefully cleaned with Hospital Cleaner Disinfectant Towels with Bleach, or alcohol however, we cannot guarantee that the coloring/markings on the unit will not be affected as a result of multiple bleach applications.
  • Replace the earphone foam pads with each new user, or use disposable sanitary headphone covers with each new user. (Earphone/headphone pads/covers are available through Williams Sound).
  • If using a plug-in microphone (MIC 014-R), replace the optional disposable sanitary microphone cover (WND 012) with each new user. (Both the MIC 014-R Plug-In Microphone and WND 012 Sanitary Microphone Cover are available through Williams Sound. The WND 012 is sold in packs of 100).
  • Do not spray or put liquid directly on the unit. Apply cleaning solution to a wipe or swab to clean the Pocketalker. Avoid pressing hard. It is crucial that No Liquid of any kind gets in the electronics of the unit, (i.e. Headphone jack, microphone jack, USB charging jack, internal speaker, internal microphone, volume knob, tone control or t-coil switch).
  • Caution: Avoid getting any liquid inside the Pocketalker unit as it can damage the circuit board and will void the warranty.

Williams Sound Pocketalker Specifications

Particular Dimensions
Dimensions 4.9” L x 2.0” W x 1.0” H. (124mm x 51mm x 25mm) (Not including clip or microphone assembly)
Weight 3.1 oz. (88 grams) (with batteries)
Color/material White ABS/Polycarbonate molded plastic case.
*Battery Type Two 1.5V (AAA size), Alkaline* or NiMH rechargeable*

(Williams Sound BAT 010-2 Alkaline or BAT 022-2 NiMH recommended)
Battery Life Up to 105 hours (typical usage) with the BAT 010-2.
Low Battery Indicator: Power “On” Green light on front panel flashes.
**NiMH battery Charging Charging: 16 hours with BAT 022-2. Red LED blinks when charging.
End of Charge: Red LED is on solid. At end of charge, maintenance charge is provided.
NOTE: Charging requires optional charging kit BAT KT7 or BAT KT8.
Microphone Internal, omnidirectional MEMS microphone (micro-electro-mechanical system).
Optional External, omnidirectional, plug-in electret microphone with foam windscreen and 3.5mm mono plug (MIC 014-R).
T-Coil Internal with on/off switch and LED indicator.
Tone Control External rotary control knob allows user to adjust high/low frequency to optimize hearing.
***Balance Control Adjusts Left/Right Volume Balance
Power/Volume Control External rotary volume control knob with integrated power ON-OFF switch.
Microphone Jack 3.5 mm, stereo mini plug.
Tip=Mic signal, Ring=NC, Sleeve=Gnd.
Headphone Jack 3.5 mm, stereo mini plug.
Tip=Left/Mono, Ring=Right, Sleeve=Gnd.
Approvals RoHS, WEEE, FCC, IC
Electrical Specifications (1 kHz Sine Wave reference) Typical
Power output 52 mW (max) into 32 ohms (Stereo)
ALC Automatic Level Control; Limits maximum output level
Distortion 1% THD (max)
Max gain 63 dB at 2.5 kHz (Tone=High)
Frequency response
Tone Control at high position 2.7dB boost at 5 kHz, 6.7dB cut at 400 Hz.
Tone Control at mid position 0.6dB cut at 5 kHz, 2.9dB cut at 400 Hz.
Tone Control at low position 2.0dB cut at 5 kHz, 3.0dB boost at 400 Hz.
*Battery switch must be in correct position for battery type being used.
**Charging requires optinal charging kit BAT KT7 (USA) or BAT KT8 (International).
***When using mono earphones, headphones or neckloop, the balance control on the Pocketalker must be turned fully counter-clockwise (to the “mono” position) for best volume and battery life.


5 year warranty (90 days on accessories)

Customer Reviews

Please enter your and your friends email address below.
Fields marked with * are compulsory

Submit Cancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.rehab-store.com