Duralife DuraGlide Reclining A Level Glide Bath and Commode Transfer System

Duralife DuraGlide Reclining A Level Glide Bath and Commode Transfer System

Brand/Manufacturer: DURALIFE
Save
Authorized Retailer Badge
  • HyGiene Products
  • Non Returnable
  • FSA Approved
  • Free Shipping no minimum

Duralife DuraGlide Reclining A Level Glide Bath and Commode Transfer System is designed to be used with any standard tub and eliminates the need for heavy lifting or awkward transfers. When attached to the adjustable tub rails, the seat rolls into the tub for bathing or showering.

Estimated Shipping Time: 2-3 Weeks.

Item # Desc Pkg Reward Price
346 50"H x 54"W x 48"D Each $80.91
$2966.65
$2696.99

Features

  • Duralife DuraGlide Reclining A Level Glide Bath and Commode Transfer System features with adjustable back and leg extension
  • Duraglide is equipped with 4 locking 5" casters and comes standard with safety belt
  • Seat size: 25"H x 17"D
  • Overall chair size: 24"W x 43"H x 21"D
  • Clearance: 19"
  • Space between arms: 18"
  • Tub frame size: 30"W x 16"D x 20" to 25"H
  • Weight: 35lb

Duralife Product Care

All Duralife products are made from the highest quality furniture grade PVC  pipe.

As with any healthcare product, it should be checked periodically for any damage occurring from daily use. Fittings and joints should be checked at this time also.

CLEANING INSTRUCTIONS

PVC Pipe

Use a soft cloth and wash with soap and water or any non-abrasive cleaner. Disinfectants may be used as required. Use alcohol or acetone on any deep scratches or markings. Swing armchairs are not watertight and disinfectant can be used inside the pipe. Let the solution drain out of the bottom of the chair before transporting.

Polyester Fabric

Prepare a cleaning solution using 1 tablespoon of liquid dish detergent and 2 tablespoons of household bleach mixed with 1 gallon of water. Use a sponge or soft cloth dampened in the solution. Remove the solution with a sponge or soft cloth and clean water. Use a brush in a circular motion to reach crevices. Disinfectants may be used as required. DO NOT TUMBLE DRY.

Casters

To install casters in a shower chair and other products:

  1. Turn product upside down on a protected surface.
  2. Align the caster stem with the hole in the caster socket and tap in with a soft-faced hammer. Casters should be lubricated on a routine basis with a silicone lubricant. Hair and any foreign material should be removed from around the axel.
  3. Drain holes in the bottom of the caster fittings should be checked for blockage. Insert a small wire in the hole to remove any accumulated debris.

Caution:- Products are made of plastic pipe. Do not store near a heat source.

Customer Reviews

Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*


Submit Cancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.rehab-store.com

Close