Clarke Toilevator GRANDE Extra Long Elevated Toilet Platform

Clarke Toilevator GRANDE Extra Long Elevated Toilet Platform

Brand/Manufacturer: CLARKE HEALTH CARE
Save
Authorized Retailer Badge
  • HyGiene Products
  • Non Returnable
  • FSA Approved
  • Latex Free

Clarke Toilevator grande Extra Long Elevated Toilet Platform that adds 3.5 inches to the toilet, Grande is a longer base to accommodate the newer elongated toilets. Toilevator is more stable than an add-on raised toilet seat. Suitable for people with mobility issues such as arthritis or those who use a wheelchair.

What does Clarke Toilevator Grande Toilet Platform Include?

  • 1 Spacer Base
  • 1 Soil pipe extension
  • 2 Long closet bolts
  • 4 Hexagon nuts
  • 4 Flat washers
  • 2 Plastic washers
  • 2 Trim caps
  • 2 Foam seals
  • 1 Extended flexible water hose
  • Installation instructions

Item # Desc Pkg Price
AH350 28"L x 14.25"W x 3.5"H Each
$361.49
$253.00

Features of Clarke Toilevator Grande Extra Long Toilet Supply Line

  • Safe and secure, one-time installation
  • No special cleaning or maintenance is required
  • Toilevator Grande fits standard round or elongated toilet base
  • Comes in White color and can be painted to match any bathroom decor
  • Weight capacity: 500lb

What to buy with Toilevator Grande Raised Toilet Base


How to use Clarke Toilevator Grande Extra Long Elevated Toilet Platform?

Step 1: Disconnect Water Line from Toilet and Empty Toilet of Water

  • A. Remove the toilet tank lid and put it in a safe place, out of the way.
  • B. Turn the toilet tank water valve to the closed position. This valve should be located on the wall behind the toilet, to the left and near the floor. To close the valve, turn it clockwise.
  • C. Flush twice to empty as much water from the toilet and tank as possible and to ensure that the water inlet valve has been properly closed.
  • D. Remove any remaining water in the tank and toilet bowl with a sponge, bailer or a wet/dry vacuum.
  • E. Disconnect the water hose from the toilet tank and wall valve. Use a wrench if needed.
Toilevator Toilet Base Riser
 

Step 2: Disassemble toilet from floor

  • A. Remove the trim caps that cover the closet bolts. Use a screwdriver if needed. Closet bolts secure the toilet to the floor and are located on the toilet's base near the floor. Remove the nuts from the closet bolts.
  • B. Lay newspaper and perhaps some plastic on the floor to place the toilet and tank.
  • C. Remove the toilet from its mount and place it on the newspaper. To make handling the toilet easier. You may wish to remove the toilet tank. Disassemble the tank from the toilet base by removing the fasteners located at the bottom of the toilet tank. Or, you may wish to get help from another person. With one person on each side of the toilet, remove the entire toilet tank and toilet assembly from the closet flange and place the assembly on the newspaper.
    Note: If you have difficulty removing the toilet, you may need to break the seal to the closet flange by rocking the toilet from side to side.
  • D. Remove any remaining old wax or foam seal from the closet flange and toilet underside.
    Note: Be careful not to drop anything down the open soil pipe. It is a good idea to crock the open pipe temporarily.
Toilevator Toilet Base Riser
 

Step 3: Locate the Correct Spacer Adjustment Holes

  • A. Place the spacer flat on the floor so the lettering is showing. Note that there are 6 pairs of numbered holes. One end is labeled A and the other end is labeled B.
  • B. Find the adjustment position by placing the toilet on top of the spacer. To correctly find the adjustment position, the closet bolt holes of the toilet (those holes on either side of the soil pipe opening if the toilet has more than one set of bolt holes) should line up with one of the six sets of numbered holes on the spacer.
  • C. Choose a set of holes that allow the front edge of the toilet base to come up as close as possible to the end of the spacer without overhanging while completely covering up the spacer top surface detail.
    Note: The spacer is reversible. Either end can go forward. D. Record the number of the correct spacer hole and whether the A end or the B end is closest to the wall. (Example: 3A - toward the wall)
Toilevator Toilet Base Riser
 

Step 4: Install the Spacer and Soil Pipe Extension

  • A. Remove the old closet bolts by sliding them out of the slots of the floor flange.
  • B. Replace the new longer closet bolts that were supplied with the kit in the closet flange bolt receptacles.
  • C. Place the spacer on the floor, over the closet flange, with the closet bolts through the correct spacer holes and the spacer in the correct orientation.
  • D. Unwrap one foam seal (supplied with the kit) and push it into place over the bottom end of the pipe fitting.
  • E. Place the pipe fitting with the foam ring seal into position in the closet flange by placing the pipe fitting over the closet bolts. The word "UP" on the pipe should face up. Push down until the foam* seal is seated firmly in the closet flange and the pipe is resting on top of the spacer.
  • F. Place on round washer supplied with the kit over each closet bolt and screw on one nut over each closet bolt. Tighten nut down to hold the spacer in position. Do not over tighten. Check alignment.
Toilevator Toilet Base Riser
 

Step 5: Re-install the Toilet onto the Spacer

  • A. Unwrap the second foam ring, supplied with the kit, and assemble onto the underside of the toilet. Push the foam ring around the soil pipe opening until it rests on the porcelain.
  • B. Lower the toilet onto the spacer with the closet bolts coming through the bolt holes. It is easiest to lift the toilet onto the spacer with two people. Push the toilet down firmly to set the foam seal. Make sure that the toilet and spacer are reasonably perpendicular to the wall. Adjust the rotation as necessary.
  • C. Place a plastic washer, supplied with the kit, over each closet bolt.
  • D. Place the other flat washers, supplied with the kit, over the closet bolts and on top of the plastic washers. Fasten the second set of nuts over the closet bolts until tight.
    Note: Be careful not to overtighten the fasteners since overtightening may cause the porcelain to break.
  • E. Install the trim caps supplied with the kit over the nut assembly and snap into place over the plastic washer.
  • F. Re-assemble the toilet tank to the back of the toilet at this time, if you took it off.
Toilevator Toilet Base Riser
 

Step 6: Reconnect the Water Supply to the Toilet Tank

  • A. If your original cold water line is still long enough to reach your toilet tank, you may reuse it. Otherwise, use the longer water hose supplied with the kit. If you cannot reuse your previous water inlet connection or the supplied water hose, check at your hardware store for the correct water line fixture.
    Note: The supplied water connection hose is for use on compression outlet valves only. Do not use the supplied water line on iron pipe stub outs, slip joint valves or flare outlet valves. The supplied water con-nection hose is intended for normal household water pressure up to 100 psi. If your system uses more than 100 psi., attach a higher pressure hose.
  • B. Turn the water inlet valve to the open position, coun-ter clockwise. With the water valve open, the toilet tank should fill with water and the toilet should be ready to flush. Try flushing once or twice before use.
    Note: If the water hose connections are leaking, tighten the connections with a wrench until it stops.
  • C.Replace the toilet tank lid.
  • D. If desired, a bead of silicone sealant can be applied between the spacer and the toilet as well as between the spacer and the floor.
Toilevator Toilet Base Riser
 

Warranty

Manufacturer provides a one Year warranty against manufacturing defects from date of original purchase. Excludes damage due to wear and tear or abuse. Warranty covers parts, grabs, paraplis, ramp, toilevator, arco, mrail, dst, ottobock.

Customer Reviews

Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*


Submit Cancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.rehab-store.com

Close