Winco Designer Padded Vinyl Blood Drawing Chair

Winco Designer Padded Vinyl Blood Drawing Chair

Brand/Manufacturer: WINCO

Winco Designer Padded Vinyl Blood Drawing Chair can easily be adjusted up or down based on the height requirements of the phlebotomist, doctor, nurse or clinician. Additionally Designer Blood Drawing Chair features a footrest with a no-slip grip and high impact leveling feet. The chair combines functional design with quality and durability.


Buy this product and earn 36.14 Reward Dollars.

Item# 2578

  • Color
    View Color Swatches
  • Total: $1325.25
    Total: $1204.79
Total: $1325.25
Total: $1204.79

Winco Designer Padded Vinyl Blood Drawing Chair Features

  • Comfortable padded seat and backrest
  • Flip-Up adjustable height contoured urethane armrest
  • Regulate to personal height preference
  • High-impact, leveling feet provide stable seating on almost any surface
  • Manufactured with sturdy, powder-coated steel frames for maximum strength and years of trouble-free service
  • Over 5" of seat height adjustment
  • Designed without wheels and is not electrically powered
  • Note: SilverTex is not recommend for applications involving frequent contact with bodily fluids where bleach is the preferred or required cleaner. Bleach is not advised for cleaning SilverTex

Where to use Padded Blood Drawing Chair?

It can be used in medical settings for:

  • Blood donation 
  • Blood collection
  • Sampling procedures

Winco Blood Drawing Chair User Manual

How to Assemble Winco Padded Blood Drawing Chair?

Tools Needed

  • Multiple size wrench included (or your own 7/16" or adjustable wrench)
  • 3/16” Hex Allen wrench included
  • Phillips-head screwdriver – for checking tightness of all screws after shipping
  • Scissors or box cutter
  • Powered tools not recommended

Seat Installation

  • Position Chair Frame in upright position. Check tightness of all installed screws, bolts and nuts and other fasteners in case they loosened during shipping.
  • Align the screws on bottom of the Seat Assembly, with the Seat Support holes. (Hole spacing of Seat Supports will be narrower toward front of Chair). Seat can only be properly installed facing one direction. Be sure that all (4) Seat Screws go completely through the Seat Support straps on chair frame.
  • Install (4) lock nuts to the screws on the Seat Assembly and completely tighten with 7/16" wrench.

Arm Installation

  • If the Arm assembly has not yet been installed, insert it into the Receiving Tube on Seat Frame Assembly.
  • Then adjust the arm to the desired height and tighten the knob. Screw the Knob into the Slot. This will “capture” the arm and keep it from being able to be pulled out of the frame accidentally.

How to Clean Blood Drawing Chair?

  • Remove grime, hair and body oils.
  • Your furnishings should be cleaned with mild soap and water solution and a damp cloth on a regular basis (especially where skin and hair make contact with upholstery).
  • Avoid harsh detergents that could damage the upholstery or finish of your recliner. If the furnishing is disinfected with bleach, it must be wiped off using only clean water on a damp cloth and then be allowed to air dry. Failure to rinse upholstery with clean water can result in a build-up of residues over time that can dry out the upholstery and cause changes to the look and feel of the upholstery and eventually can lead to cracking.

Winco Blood Drawing Chair Specifications



Seat Height (to floor)

25.5" to 31" (648cm - 78.7cm)

Seat Width

19" (48.26cm)

Seat Depth

19" (48.26cm)

Overall Height

47" to 52.5" (119.4cm - 133.4cm)

Armrest Height

33" to 44.5" (83.8cm - 113cm)

Width with Try Down

27.5" (69.85cm)

Seat Back Height

24" (60.96cm)


27" (68.58cm)

Weight (range)

65lbs - 73lbs (29.5kg - 33.1kg)

Weight capacity

300lbs (136.08kg)


Winco Warranty

  • Limited One Year Product Warranty:
    - Winco Mfg., LLC warrants the complete product for one (1) year. At Winco Mfg., LLC sole discretion, it may repair or replace any components freight free that are found to be defective during the first year after shipment from the Winco facilities. Winco Mfg., LLC shall not be liable for any labor, or any other costs incurred as a result of or in conjunction with a warranty claim.  
  • Limited Three Year Warranty:
    - Winco Mfg., LLC warrants recliner mechanisms, electrical components, vinyl panels and vinyl on upholstered parts [from cracking or delaminating] pressurized gas springs and casters, when new, for a period of three (3) years. At Winco Mfg., LLC sole discretion, it may repair or replace components found to be defective. Winco Mfg., LLC shall not be liable for any labor, shipping or any other costs incurred as a result of or in conjunction with a warranty claim. 
  • Limited Lifetime Chair Frame Warranty:
    - Winco Mfg., LLC warrants steel and aluminum base frames for all products, when new, for the lifetime of the original purchaser. This limited warranty does not apply to paint/finish or any components attached to the frame such as; upholstery, foam, casters, mechanisms or related parts that are covered under above warranties. Winco Mfg., LLC shall not be liable for any labor, shipping or any other costs incurred as a result of or in conjunction with a warranty claim.  


Customer Reviews

Please enter your and your friends email address below.
Fields marked with * are compulsory

Submit Cancel
The selected product information has been successfully emailed to your friend.

Thank you for using