Spinning Light Show Switch Operated Toy

More Information

• Operation:
  - The Spinning light show requires two AA batteries (not included). Use alkaline batteries only (e.g. Duracell or Energizer brand). Do not use rechargeable batteries or any other type of batteries because they supply lower voltage and the unit will not perform properly. Never mix old and new batteries together or different brands or types together
  - The battery compartment is located under the base of the unit. Carefully turn the unit over, and then remove the battery cover with a small Phillips Head screwdriver. Install new batteries, being careful to observe proper battery polarity
  - Connect any capability switch via the 1/8 inch jack on the side of the unit. Make sure your connection is tight, there should be no gaps. Activate your switch and you will be rewarded with spinning lights. Release pressure from your switch and the lights will stop
• Care of the Unit:
  - The Spinning Light Show can be wiped clean with any mild household multi-purpose, non-abrasive cleaner and disinfectant
  - Do not use abrasive cleaners, as they will scratch the surface of the unit
  - Do not submerge the unit, as it will damage the electrical components

Customer Reviews