Mangar Eagle Lifting Cushion Features
- Effective in tight spaces and against walls
- Lightweight and portable
- Easy to clean and disinfect
- Suitable for single-handed care
How to use Mangar Eagle Lifting Cushion
- Remove the Eagle from the carrying bag, unfasten the straps and unroll.
- Ensure the tab on the backrest strut has been pulled out and is not hidden under the backrest before operating the Eagle.
- Connect the four hoses from the hand control to the corresponding numbered and colored connectors on the Eagle.
- Connect the hose from the hand control to the Airflo 24 compressor.
- Position the Airflo 24 compressor so that it will not be in the way while positioning the patient. Ensure that the hoses are not kinked.
Switching the Airflo 24 ‘On’ and ‘Off’-
- To switch on, momentarily press the ‘Power’ button. The bottom battery status indicator light will come on.
- To switch off, momentarily press the ‘Power’ button. The bottom battery status indicator light will go out.
Positioning the patient on the Eagle-
- Position the Eagle at the side of the patient so that the patient’s head is level with the Eagle badge.
- Transfer the patient onto the Eagle. The head should lie on the Eagle badge and the body should lie centrally.
- NOTE: Place a blanket, groundsheet, towel or similar under the Eagle if using it on a rough surface.
Operating-
The following instructions apply equally when the Eagle is being operated by a person raising themselves without assistance, or by an assistant raising a patient.
Mangar Eagle Lifting Cushion Specifications
Particulars |
Specification |
Maximum user weight |
220kg (490lbs) |
Seat height (approx) |
56cm (22”) |
Overall length (approx) |
112cm (44”) |
Overall width (approx) |
64cm (25”) |
Weight (Inc. Hand Control) |
6.3kg (13.9lbs) |
Maximum air pressure |
0.35bar (5psi) |
Max / Min temperature |
+50°C / -15°C (122°F/5°F) |
Deflated and rolled (in bag) |
Length :72cm (28”)Diameter: 26cm (10”) |