ComfortHandle - Tablet Handle and Stand Features
- Includes handle, mountable base, and instructions
- Ease the Aching Fingers, Hands, and Wrists
- Use it as support at multiple viewing angles
- White plastic with black foam grip
- Rotate the handle to the most comfortable position
- Easily detach the handle when one needs to pack the tablet for travel
- ComfortHandle works well on all models of iPad, from Mini to 12.9" Pro; and on other tablets with metal or hard shiny plastic construction
- Dimension: 5.75"L x 2.5"H x 2"W
- Materials: ABS plastic and precision steel parts
- Note - The mounting tape will not stick to dull plastic, soft plastic, leather, vinyl or fuzzy surface cases
How To Install ComfortHandle?
Installation
Just attach the base to your tablet. Use the supplied template regardless of tablet size to ensure you get the correct viewing angle when using your handle as a table support.
|
|
Step 1
Lay your tablet face down on a soft surface. Use the supplied alcohol swab to clean the central area of the tablet.
|
|
|
|
Step 2
Position template centered left and right and flush with the bottom edge. Hold it in position with a piece of tape on the bottom or one side
|
|
|
|
Step 3
Peel the tape liner and position along the top of the template between the arrows.
|
|
|
|
Step 4
Press into position and rub your finger back and forth on the flat area Attach handle by sliding it in between the grooves. It will click into place
|
|
|
|
Step 5
Attach handle by sliding it in between the grooves. It will click into place
|
|
|
|
Step 6
The handle can be temporarily removed for travel. To remove the handle from the base, press the latch down and slide the handle back out of the grooves
|
Adjustments
|
|
ComfortHandle - Adjustment
Friction setting of your handles rotation can be adjusted by turning the screw on the bottom slightly in either direction- clockwise to increase friction; counterclockwise to ease it. Ideally, the handle should turn easily but remain firmly in place when held or used as a stand. Do not oil or grease.
|
Permanent Removal
If the need arises, you can completely remove the base with no harm to your tablet. This process will destroy the tape, but do not worry, if you need to re-attach your handle on another tablet, you can order a new base with tape.
|
|
Permanent Removal Step 1
Lay your tablet face down on a soft surface with the squared end of the base nearest to you. Rotate the handle into the downward position pointing toward yourself.
|
|
|
|
Permanent Removal Step 2
Put increasing downward pressure on the handle until the base and tape snap off. If tape sticks to the tablet, you can remove it by rubbing with your finger.
|